Oil squarting from engine block SBC 350
-
Frylok
- 330ft
- Posts: 407
- Joined: Wed Mar 04, 2009 3:06 am
- Contact:
Oil squarting from engine block SBC 350
I was running my SBC 350 and noticed oil spraying out from the hole at the bottom of the engine.Anyone else have this problem?Pic below shows what hole is spraying oil.When i press the gas it sprays
You do not have the required permissions to view the files attached to this post.

-
speedy
- 60ft
- Posts: 89
- Joined: Sat Mar 29, 2008 1:17 am
- Location: west
Re: Oil squarting from engine block SBC 350
Just put a SHORT bolt in it to plug it. The fuel pump pushrod is behind it. If your not running a mech. fuel pump you can put anything in it.
-
Frylok
- 330ft
- Posts: 407
- Joined: Wed Mar 04, 2009 3:06 am
- Contact:
Re: Oil squarting from engine block SBC 350
Thanks I put a really short bolt in there with thread sealant,then the fuel pump went bad :\

-
the mad scientist
- Staged
- Posts: 56
- Joined: Mon Mar 03, 2008 6:07 pm
Re: Oil squarting from engine block SBC 350
if the bolt is 2 long it will bind the fuel pump rod against the block
-
Frylok
- 330ft
- Posts: 407
- Joined: Wed Mar 04, 2009 3:06 am
- Contact:
Re: Oil squarting from engine block SBC 350
Well i took the old fuel pump off and i moved the rod up and down with my fingers so its fine,put a new pump in and it works great.
