i'm looking for someone who can either tune or chip an EEC-IV for a car i'll be restoring this winter. the problem is, it's a CFI (TBI) motor. i CANNOT change the setup because the car is staying 100% stock to the eye. the computer and harness are out of an 85 LTD LX, so it's from a 5.0 HO CFI car.. i just need it tuned or chipped to be compatible with the small amount of work i'm putting into the motor.. i'm just doing a small cam, upgrading from E6's to E7's, a decent amount of port work to the heads/intake/manifolds, 52# injectors(stocks are 46#), and an MSD coil (painted to look stock)
the car is an 83 Tbird Heritage with the TRX option, so it has the EEC-III setup.. but i'm going to disguise the EEC-IV setup to look like the stock, untouched EEC-III..
need to find someone who can tune or chip a ford EEC-IV
-
93F150
- 60ft
- Posts: 107
- Joined: Thu Mar 13, 2008 6:21 pm
- Location: south jersey
need to find someone who can tune or chip a ford EEC-IV
http://www.ShadowMSC.com < NEW
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies
-
Espresso
- 60ft
- Posts: 176
- Joined: Fri Mar 21, 2008 4:29 pm
- Location: Panama City, Panama
- Contact:
-
93F150
- 60ft
- Posts: 107
- Joined: Thu Mar 13, 2008 6:21 pm
- Location: south jersey
Re: need to find someone who can tune or chip a ford EEC-IV
i have yet to find anyone who can verify if a TwEEcer or quarterhorse will even work, beings it's CFI/TBI
http://www.ShadowMSC.com < NEW
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies