I am thinking of running a second stage for a different index, combined <250hp
TIA
-4an feed line - how big a shot?
-
_Twisted_
- 60ft
- Posts: 98
- Joined: Tue Mar 04, 2008 12:15 am
- Location: Near Atco
- Contact:
-4an feed line - how big a shot?
Can a -4an feed line of N2O support?
I am thinking of running a second stage for a different index, combined <250hp
TIA
I am thinking of running a second stage for a different index, combined <250hp
TIA
-
cmracing
- 60ft
- Posts: 193
- Joined: Tue Mar 04, 2008 12:14 am
Re: -4an feed line - how big a shot?
The Big Shot plate is rated 200hp to 400hp and only uses a -4 line. Above that I would go up to a -6 and probably two bottles and a y-connector.
-
lower et then u
- Burnout Box
- Posts: 10
- Joined: Mon Mar 03, 2008 5:07 pm
Re: -4an feed line - how big a shot?
4-AN line will not flow any more then a 200 shot. If you plan on running close to that or more I would recommend using a 6-AN feed line.
-
Pyott Racing
- 330ft
- Posts: 487
- Joined: Mon Mar 10, 2008 1:11 pm
- Contact:
Re: -4an feed line - how big a shot?
put a -6an line on it and be done with it
INDUCTION SOLUTIONS
2nd Annual YELLOWBULLET.COM NATIONALS Sept 2,3,4 2011[/b][/color]
Glauner's Auto Body Inc Parkesburg, Pa. (610)593-2775
-
vino350
- 60ft
- Posts: 143
- Joined: Mon Mar 31, 2008 7:16 pm
- Location: south jersey
Re: -4an feed line - how big a shot?
can run a 300shot on a 4an line....but if ur running alot just change it to a 6an
85 s-10
J@E Performance
J@E Performance
-
_Twisted_
- 60ft
- Posts: 98
- Joined: Tue Mar 04, 2008 12:15 am
- Location: Near Atco
- Contact:
Re: -4an feed line - how big a shot?
thanks for the help