PUMP GAS LIMIT

[moody34]

In your guys opinion, whats the biggest shot you would safely spray a fogger with pumpgas without detonation? Motor is a 9:1 BBC with autolite 3924 plugs and aluminum heads. thanks, Brian

[adamsvega]

THAT WOULD DEPEND ON CAM,GEAR AND CONVERTER !!! IF YOUR STREET GEARED AND CONVERTER IS WAY TIGHT THAN YOU CAN WITH THE RIGHT TUNE PUNCH 300 SHOT . IT IS ALL ABOUT PISTON SPEED AND DWELL AND CAM TIMMING .DO YOU HAVE THE RIGHT FUEL TO BURN ANT THOSE LIMITS . HAVE DONE IT WITH A SHORT ROD 377 SBC AND NOS CAM AND HEADS BUT IT WAS DESIGNED TO DO IT .(PUMP GAS WARS)

[moody34]

herbert solid cam http://www.dougherbert.com/solidcamlifters-p-9756.html, t400 4000 stall w/3.73 and 27 in. tall tires. hope that clears up a little. thanks for the help, Brian

[K*A*B]

alot

[BIRDMAN]

FORGED PISTONS. I know people at the track have sprayed otherwise, saw a kid with a white stang last yr telling me he had 100 passes on hypereutectic pistons god bless him then... Forged Pistons or your liable to get into some trouble. nitrous pistons/gas ported always a plus.

[adamsvega]

DONT EVER PUT A HYPER -U-CRAPTIC PISTON INTO A DETONATION PRONE SITCH. THEY DONT TAKE IT WELL AND ITS PROTEST WILL BE YOUR MOTOR AT MIN. ..... GOOD SOUND ADVICE .. A STOCK SOFT ALOY CAST WILL LAST LONGER .