Hey guys im installing my turbo kit which is a drivers side mount, and instead of going through the troubles of trying to cope with the a/c i wanna yank it out. Only problem is my car has no power steering so i was wondering where i should locate the tensioner and how you guys would go about the serp setup?
thanks
Serp setup for sbf
-
NsTyFoX
- 60ft
- Posts: 87
- Joined: Sat Mar 15, 2008 12:49 pm
- Location: marlton, South jersey
Serp setup for sbf
91 gt-some mods
-
rednotch
- 60ft
- Posts: 228
- Joined: Thu Feb 28, 2008 10:57 pm
- Location: south nj
Re: Serp setup for sbf
electric water pump with march bracket kit or march, tfs etc a/c delete bracket that moves the stock tensioner to where the a/c was
other option is the march adj alt bracket with a standard rotation w/p
march style a/c delete
http://www.marchperf.com/instructions/1 ... ctions.pdf
other option is the march adj alt bracket with a standard rotation w/p
march style a/c delete
http://www.marchperf.com/instructions/1 ... ctions.pdf
-
NsTyFoX
- 60ft
- Posts: 87
- Joined: Sat Mar 15, 2008 12:49 pm
- Location: marlton, South jersey
Re: Serp setup for sbf
could i just get away without using the a/c delete and the tensioner like this guy did?
You do not have the required permissions to view the files attached to this post.
91 gt-some mods
-
turbocoupejim
- Quarter mile
- Posts: 2773
- Joined: Thu Feb 28, 2008 12:19 pm
- Location: LINDENWOLD
Re: Serp setup for sbf
yea thats one of the ways you could go...
93 LX work in progress 
MR.GDRHOTTIE
MR.GDRHOTTIE
-
rednotch
- 60ft
- Posts: 228
- Joined: Thu Feb 28, 2008 10:57 pm
- Location: south nj
Re: Serp setup for sbf
thats a stadard rotation water pump so you will need to change yours
-
Flyin Ryan
- 60ft
- Posts: 166
- Joined: Sat Mar 15, 2008 3:43 am
- Location: NJ
Re: Serp setup for sbf
rednotch wrote:thats a stadard rotation water pump so you will need to change yours
According the pic posted above he'd need a standard rotation waterpump and adjustment rod from March like this one correct? http://www.marchperf.com/pg51.html#rods
How about the way this guy did his?? looks like the wp is still reverse rotation
Last edited by Flyin Ryan on Thu May 29, 2008 12:36 pm, edited 2 times in total.
-
turbocoupejim
- Quarter mile
- Posts: 2773
- Joined: Thu Feb 28, 2008 12:19 pm
- Location: LINDENWOLD
Re: Serp setup for sbf
i think the crown vics had the standard rotation pumps...
93 LX work in progress
MR.GDRHOTTIE
MR.GDRHOTTIE
-
rednotch
- 60ft
- Posts: 228
- Joined: Thu Feb 28, 2008 10:57 pm
- Location: south nj
Re: Serp setup for sbf
Flyin Ryan wrote:rednotch wrote:thats a stadard rotation water pump so you will need to change yours
According the pic posted above he'd need a standard rotation waterpump and adjustment rod from March like this one correct? http://www.marchperf.com/pg51.html#rods
How about the way this guy did his?? looks like the wp is still reverse rotation
thats fine for a race only car. on the street that bitch would over heat... the belt has like a 1/2" conctact area on the water pump pulley with nothing to keep tension as the belt streches.
-
Flyin Ryan
- 60ft
- Posts: 166
- Joined: Sat Mar 15, 2008 3:43 am
- Location: NJ
Re: Serp setup for sbf
rednotch wrote:thats fine for a race only car. on the street that bitch would over heat... the belt has like a 1/2" conctact area on the water pump pulley with nothing to keep tension as the belt streches.
Makes sense and I don't own a fox with that setup but my pickup has been setup that way for over two years and has seen tons of daily driver usage without any cooling issues.. but it is a gm
