mini starter
caster camber plates if the deal i have doesn't fall through..hotchkis,upr,etc..no junk
holley systemax 1 inch spacer
50-60lb injectors and a blowthrough mass air calibrated for them
lx fender extentions
...that's it for now
F/S
I have 2 sets of rear hatchback seats..one out of a 93lx..BLACK..another set out of a GT..charcoal gray tweed...$60 bucks for each
50lb injectors with a matching pro m drawthrough mass air meter..very low miles bought from j&e..mainly used on the dyno...$450
header studs for SBF...$40
wtb/f.s mustang parts
-
88blownstang
- 330ft
- Posts: 565
- Joined: Thu Feb 28, 2008 4:38 am
- Location: south jersey
-
88blownstang
- 330ft
- Posts: 565
- Joined: Thu Feb 28, 2008 4:38 am
- Location: south jersey
Re: wtb/f.s mustang parts
bump...anyone..also need an electric fan and an aluminum driveshaft if anyone has these.thanks
-
Mach1Dan
- Staged
- Posts: 27
- Joined: Fri Mar 07, 2008 8:37 pm
- Location: Harleysville PA
Re: wtb/f.s mustang parts
Is the black 93 LX back seat the tweed style? Thanks Dan
-
itslegal
- 60ft
- Posts: 88
- Joined: Thu Feb 28, 2008 3:40 pm
- Location: off exit 8a or 9 on NJTP
Re: wtb/f.s mustang parts
I got a puller spal fan, basically new. heres a link to the specs.
http://www.spal-usa.com/fans/automated/ ... aight.html
I also got the pig tail connector for it also
$100 shipped to you
PM me an email address if you'd like to see pictures of the actual fan i got
Mike
http://www.spal-usa.com/fans/automated/ ... aight.html
I also got the pig tail connector for it also
$100 shipped to you
PM me an email address if you'd like to see pictures of the actual fan i got
Mike
-
M&M RACING
- Renting Helmet
- Posts: 2
- Joined: Sat Mar 08, 2008 6:22 pm
Re: wtb/f.s mustang parts
do you have any back black gt seats?
-
88blownstang
- 330ft
- Posts: 565
- Joined: Thu Feb 28, 2008 4:38 am
- Location: south jersey
Re: wtb/f.s mustang parts
no black gt seats...4 cylinder ones are comfier 
..lol..hmm..try dean302 i think he had a set before.not sure though
..lol..hmm..try dean302 i think he had a set before.not sure though-
88blownstang
- 330ft
- Posts: 565
- Joined: Thu Feb 28, 2008 4:38 am
- Location: south jersey
-
93F150
- 60ft
- Posts: 107
- Joined: Thu Mar 13, 2008 6:21 pm
- Location: south jersey
Re: wtb/f.s mustang parts
there's a FRPP aluminum driveshaft on 4 eyed pride.. http://vb.foureyedpride.com/showthread.php?t=57609
http://www.ShadowMSC.com < NEW
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies
-
88blownstang
- 330ft
- Posts: 565
- Joined: Thu Feb 28, 2008 4:38 am
- Location: south jersey
Re: wtb/f.s mustang parts
200 bucks and then some shipping..no good lol