
My car with the welds
-
lightemup
- Forum Moderator
- Posts: 768
- Joined: Thu Feb 28, 2008 1:10 am
- Location: Mullica Hill, NJ
My car with the welds
Had my car ready for buick/ford and had to take a pic with the welds


Last edited by lightemup on Sun Mar 16, 2008 11:23 am, edited 1 time in total.

- 5.0joe79
- 1000ft
- Posts: 1195
- Joined: Tue Mar 04, 2008 6:02 pm
- Location: GLENDORA, S.JERZ
-
lightemup
- Forum Moderator
- Posts: 768
- Joined: Thu Feb 28, 2008 1:10 am
- Location: Mullica Hill, NJ
Re: My car with the welds
Ya I am I'm putting my 18's on ebay as soon as I get a set of drag radials

- 5.0joe79
- 1000ft
- Posts: 1195
- Joined: Tue Mar 04, 2008 6:02 pm
- Location: GLENDORA, S.JERZ
Re: My car with the welds
if i may make another sug. take off the wing you got on their now and leave it plain or a nice 10in alum. wing would look good.
unbolt the wing you got on now and take a look at the car and see how you like it first. ive seen them without wings and they look mean

unbolt the wing you got on now and take a look at the car and see how you like it first. ive seen them without wings and they look mean

#1 RANGERS FAN

-
lightemup
- Forum Moderator
- Posts: 768
- Joined: Thu Feb 28, 2008 1:10 am
- Location: Mullica Hill, NJ
Re: My car with the welds
ya man Ive wanted to take off the wing b/c wingless mustangs are awesome but I dont like the holes it leaves. My buddy has a wingless gt with the holes filled and it just doesnt look right. Id like to get a drag wing in orange but Id feel like a poser b/c Im not fast enough to need one. I like your taste man.

- 5.0joe79
- 1000ft
- Posts: 1195
- Joined: Tue Mar 04, 2008 6:02 pm
- Location: GLENDORA, S.JERZ
Re: My car with the welds
i have a friend that does great body work and restro on old cars i could get them holes done for you and you wouldnt evan know they were there.
and for the alum. wing thats why i said you could get a 10in wing. it wouldnt look like an 8sec car but it would look good.
and for the alum. wing thats why i said you could get a 10in wing. it wouldnt look like an 8sec car but it would look good.

#1 RANGERS FAN

- 88blownstang
- 330ft
- Posts: 565
- Joined: Thu Feb 28, 2008 4:38 am
- Location: south jersey
Re: My car with the welds
they do look great without wings and the pro stars look good..what size radial are you going to run?
- 5.0joe79
- 1000ft
- Posts: 1195
- Joined: Tue Mar 04, 2008 6:02 pm
- Location: GLENDORA, S.JERZ
-
Flyin Ryan
- 60ft
- Posts: 166
- Joined: Sat Mar 15, 2008 3:43 am
- Location: NJ
Re: My car with the welds
looks allot better with the prostars
- 88blownstang
- 330ft
- Posts: 565
- Joined: Thu Feb 28, 2008 4:38 am
- Location: south jersey
Re: My car with the welds
5.0joe79 wrote:the biggest he can fit under there
i hear you..i think a 10 inch wheel with a 325-50..im all about a big tire
if you drive it around on the street google stuff on them and see how they fit..i know they fit but they might rub some who knows...i have 28x12.5 on my fox body...haven't driven it yet with that size tire but it looks sick for an everyday street car..i need to do a little more beating but they don't rub as bad as i thought without beating the inner well in lol
- paxtonpwr
- 330ft
- Posts: 331
- Joined: Thu Mar 06, 2008 12:09 pm
Re: My car with the welds
Looks good! Jack had 325's on his 04 cobra and they were a bit much, now has 275/60's on his ride with 10" rim and they look sweet. His 1.36 60ft's show how they work too. 
ALL OUT AUTOMOTIVE Support Your Local Speed Shop
Tony's Metal Crafts ~ Harris Motorsports ~ Keystone Automotive
http://www.youtube.com/watch?v=83Hx2FSO ... re=related

Tony's Metal Crafts ~ Harris Motorsports ~ Keystone Automotive
http://www.youtube.com/watch?v=83Hx2FSO ... re=related

-
lightemup
- Forum Moderator
- Posts: 768
- Joined: Thu Feb 28, 2008 1:10 am
- Location: Mullica Hill, NJ
Re: My car with the welds
Im gonna go with 275/50s because my front end is about an inch off the ground with my 26" slicks right now so I cant go any taller with the rear tire.

-
lightemup
- Forum Moderator
- Posts: 768
- Joined: Thu Feb 28, 2008 1:10 am
- Location: Mullica Hill, NJ
- 5.0joe79
- 1000ft
- Posts: 1195
- Joined: Tue Mar 04, 2008 6:02 pm
- Location: GLENDORA, S.JERZ
Re: My car with the welds
i think 60's are like 26. i hade the 60's on my car they fit great

#1 RANGERS FAN

- paxtonpwr
- 330ft
- Posts: 331
- Joined: Thu Mar 06, 2008 12:09 pm
Re: My car with the welds
275-50's are 26
275-60 = 28
325-50 = 28
275-60 = 28
325-50 = 28
ALL OUT AUTOMOTIVE Support Your Local Speed Shop
Tony's Metal Crafts ~ Harris Motorsports ~ Keystone Automotive
http://www.youtube.com/watch?v=83Hx2FSO ... re=related

Tony's Metal Crafts ~ Harris Motorsports ~ Keystone Automotive
http://www.youtube.com/watch?v=83Hx2FSO ... re=related

- SOUTHERNOUTLAWSHOP
- 60ft
- Posts: 85
- Joined: Tue Mar 04, 2008 6:40 pm
- Location: GIBBSTOWN NJ
- Contact:
Re: My car with the welds
lightemup wrote:ya man Ive wanted to take off the wing b/c wingless mustangs are awesome but I dont like the holes it leaves. My buddy has a wingless gt with the holes filled and it just doesnt look right. Id like to get a drag wing in orange but Id feel like a poser b/c Im not fast enough to need one. I like your taste man.






-
95StangRC
- Staged
- Posts: 56
- Joined: Sat Mar 08, 2008 1:20 am
- Location: Bridgeton, NJ
-
lightemup
- Forum Moderator
- Posts: 768
- Joined: Thu Feb 28, 2008 1:10 am
- Location: Mullica Hill, NJ
Re: My car with the welds
SOUTHERNOUTLAWSHOP wrote:lightemup wrote:ya man Ive wanted to take off the wing b/c wingless mustangs are awesome but I dont like the holes it leaves. My buddy has a wingless gt with the holes filled and it just doesnt look right. Id like to get a drag wing in orange but Id feel like a poser b/c Im not fast enough to need one. I like your taste man.
Ya I do love the drag wings but I'm way too slow for that

- budster
- Renting Helmet
- Posts: 7
- Joined: Sun Mar 16, 2008 5:27 pm
- Location: gloucester va.
Re: My car with the welds
prostars look good and wingless would look better

