USED Edelbrock 600cfm carburetor - specs:
Part Number: EDL-1405
Number of Barrels: 4
Carburetor Flange: Square bore
Choke: Manual
Fuel: Gasoline
Secondary Type: Air valve
CFM: 600
Carburetor Finish: Silver
Carb is used but was rebuilt 4 months ago. Works like new. Choke was removed for racing application. $252.95 new
--$110 or best reasonable offer, $125 shipped
NEW MSD Pro-Billet distributor for 351w SBF- specs:
PN - 8584
Computer Controlled Compatible No
Trigger Style: Magnetic
Advance Type: Mechanical
Cap Style: Male/HEI
Tach Drive: No
Slip Collar: No
Gear Material: Iron
Ignition Box Required: Yes
Distributor is NEW out of box. Has NEVER been used, has spent it's life on a shelf. $235 new
--$120 or best reasonable offer, $130 shipped
USED Holley 750 - specs:
Part Number: HLY-0-3310S
Number of Barrels: 4
Carburetor Flange: Square bore
Choke: Manual
Fuel: Gasoline
Secondary Type: Vacuum
New or Remanufactured: New
Fuel Inlet: Dual
CFM: 750
Carburetor Finish: Silver
Ford Kickdown: Yes
Throttle Linkage Type: Universal
USED. was rebuilt a year ago and only used twice since, last time was 3 weeks ago. works fine, I'm just an Edelbrock/Demon fan. $264.95 new.
$100 or best reasonable offer.. $115 shipped
hardly used Wolverine Blue Racer cam:
I do not have much info on this cam, but here is what i know -
It is a hydraulic flat tappet cam
.540/.540 lift
unknown duration
Was run in a customer's car for break in, he decided to go bigger with a different setup. Cam only has 50 miles on it. He paid 296.50 for it new.
--$120 or best reasonable offer, $135 shipped
everything located in glassboro, nj 08028.. can get pictures upon request.. thanks
ford parts and carb
-
93F150
- 60ft
- Posts: 107
- Joined: Thu Mar 13, 2008 6:21 pm
- Location: south jersey
ford parts and carb
Last edited by 93F150 on Mon Mar 17, 2008 4:12 pm, edited 3 times in total.
http://www.ShadowMSC.com < NEW
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies
-
BpRACING
- 60ft
- Posts: 95
- Joined: Sun Mar 02, 2008 9:50 am
- Location: A-town south jersey
-
93F150
- 60ft
- Posts: 107
- Joined: Thu Mar 13, 2008 6:21 pm
- Location: south jersey
Re: ford parts and carb
PN is 8584, just needs a cap
http://www.ShadowMSC.com < NEW
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies
-
85monte
- Burnout Box
- Posts: 18
- Joined: Sat Mar 15, 2008 10:05 pm
- Location: Long Island, NY
Re: ford parts and carb
HEY CHRIS,
I AM STILL WAITING FOR THE MSD 6A BOX THAT I PAID FOR OVER A MONTH AGO! SHOOT ME A PM, LET ME KNOW WHATS GOING ON!
I AM STILL WAITING FOR THE MSD 6A BOX THAT I PAID FOR OVER A MONTH AGO! SHOOT ME A PM, LET ME KNOW WHATS GOING ON!
-
93F150
- 60ft
- Posts: 107
- Joined: Thu Mar 13, 2008 6:21 pm
- Location: south jersey
Re: ford parts and carb
PM sent.. 
http://www.ShadowMSC.com < NEW
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies
-
93F150
- 60ft
- Posts: 107
- Joined: Thu Mar 13, 2008 6:21 pm
- Location: south jersey
Re: ford parts and carb
compucam sold, intake sold..
updated list
updated list
http://www.ShadowMSC.com < NEW
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies
-
85monte
- Burnout Box
- Posts: 18
- Joined: Sat Mar 15, 2008 10:05 pm
- Location: Long Island, NY
Re: ford parts and carb
You have a PM
-
85monte
- Burnout Box
- Posts: 18
- Joined: Sat Mar 15, 2008 10:05 pm
- Location: Long Island, NY
Re: ford parts and carb
Still no box! 
check pms
check pms