power brake hose

[big ken sloat]

are there any substitute hose i can use for power brake hose? cant seem to find it by the foot, need quite a bit because vacuum cannister is in frt of rad support. ive been using fuel hose but was told to use brake hose only. thanks

[adamsvega]

anything that is fuel/trans or braided will work as long as the vacuum does not collapse it

[big ken sloat]

anything that is fuel/trans or braided will work as long as the vacuum does not collapse it

thanks i was thinking of replacing what i have now with some pushloc fuel hose. cant imagine that stuff collapsing.

[OLDHEAD]

I have been using Russell #6 for about 10 years,my vacuum tank is under the radiator Oldhead

[big ken sloat]

I have been using Russell #6 for about 10 years,my vacuum tank is under the radiator Oldhead

i just bought a ssbc vacuum pump and it come with plenty of hose[super thick] now i have to make somekind of muffler for that dam pump! probably wont hear it when engine is running but it is loud. good to hear from ya bob. thanks for all of your past help ken

[OLDHEAD]

Hi Ed,I had a elec. vac. pump and hated it,I ran alot,every time I hit the brakes,Went to home depot and bought 2 caps and 4 feet of 4" pvc pipe.....Made my own 4 foot tank,fits right behind the front bumper........Works great,with no noize.......Oldhead

[adamsvega]

you can put a on off hobbs switch to keep your self from being low but not run all the time . anything you can do to increase the volume of reserve helps !
the new gm trucks run a slick one that bolts to the booster and plugs into the booster .