cam/lifter question
-
93F150
- 60ft
- Posts: 107
- Joined: Thu Mar 13, 2008 6:21 pm
- Location: south jersey
cam/lifter question
ok, BY MISTAKE i put hydraulic flat lifters in my 306 on a cam that specifies 'mechanical flat' lifters.. luckily i caught this before even firing the motor, after looking up the part number on the lifter box, which told me they are hydraulic.. but my question is, what would happen? i'm trying to track down a set of the correct lifters, but i was just wondering what would happen if i were to run it the way it sits now..
http://www.ShadowMSC.com < NEW
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies
94 sonoma - D44 sfa, stock 4.3, 37x12.50 TSL Radials (basket case)
87 Tbird TC #1 - 408w/C6 with MS@ EFI and 57mm Garrett and other goodies
87 Tbird TC #3 - (daily driven project) stock 2.3T, Ranger roller cam, gutted upper intake, knifed lower intake, SC throttle body, Precision CCE-34 turbo, Tial wastegate/BOV, front mount, 3" exhaust
83 Capri RS, 408w/C4 with F.A.S.T. system and 72mm Precision with other goodies