turn key 408w afr 225s pump gas complete carb to pan etc
Posted: Sun Mar 31, 2013 5:53 pm
Motor was just freshened, maybe 100 miles on street since. Was only ran a season before it was freshened due to a lifter going bad at the end of last season.
Stock 351w block
Ohio crank forged rotating assembly
4.00" stroke steel crank
Forged H beam rods
4.030" Forged flat top pistons with valvereliefs
10.6:1 compression, pump gas
New solid flat tappet comp cam custom made for this motor (have cam card)
New lifters
New hi flow oil pump
New bearings
New double roller timing chain set
New oil pan gasket, copper coated mls headgaskets, valvecover gaskets, front/rear main seals, timing cover gasket set, water pump gaskets, intake gaskets, etc.
Arp headstuds
AFR 225 heads (72cc) with new springs
1.6 Harlan sharp rockers 7/16" stud mount
Comp hardened pushrods
164T sfi flexplate
Has a good balancer(forget which brand name).
Black painted ford racing valvecovers
New edelbrock super victor intake
Recently rebuilt Holley 850 dp
New auto lite 3924 plugs
Msd pro billet distributor and comes with plug wires
Fox mustang swap oil pan and pickup, has a dipstick and tube
fox mustang poly motor mounts
Fox mustang Mac swap headers and 3" pro chamber midpipe
Also comes with upgraded 3g alternator, alt bracket, newer alum waterpump, crank and water pump pulleys, belt, crank pulley spacer
Complete turn key setup out of my 86 mustang gt. runs 10s on motor and goes well into the 9s on a small shot, pump gas drive it anywhere.
asking 6,300 can even hear it run before you buy.
Call or text
Steve
856-236-0401
Stock 351w block
Ohio crank forged rotating assembly
4.00" stroke steel crank
Forged H beam rods
4.030" Forged flat top pistons with valvereliefs
10.6:1 compression, pump gas
New solid flat tappet comp cam custom made for this motor (have cam card)
New lifters
New hi flow oil pump
New bearings
New double roller timing chain set
New oil pan gasket, copper coated mls headgaskets, valvecover gaskets, front/rear main seals, timing cover gasket set, water pump gaskets, intake gaskets, etc.
Arp headstuds
AFR 225 heads (72cc) with new springs
1.6 Harlan sharp rockers 7/16" stud mount
Comp hardened pushrods
164T sfi flexplate
Has a good balancer(forget which brand name).
Black painted ford racing valvecovers
New edelbrock super victor intake
Recently rebuilt Holley 850 dp
New auto lite 3924 plugs
Msd pro billet distributor and comes with plug wires
Fox mustang swap oil pan and pickup, has a dipstick and tube
fox mustang poly motor mounts
Fox mustang Mac swap headers and 3" pro chamber midpipe
Also comes with upgraded 3g alternator, alt bracket, newer alum waterpump, crank and water pump pulleys, belt, crank pulley spacer
Complete turn key setup out of my 86 mustang gt. runs 10s on motor and goes well into the 9s on a small shot, pump gas drive it anywhere.
asking 6,300 can even hear it run before you buy.
Call or text
Steve
856-236-0401