Page 1 of 1
WTB - SB chevy aluminum heads
Posted: Thu Jun 06, 2013 11:56 am
by jw80malibu
looking for a set of heads to put on my 383, aluminum preferred, non center bolt.
- John
Re: WTB - SB chevy aluminum heads
Posted: Thu Jun 06, 2013 5:26 pm
by Frylok
What kind are you looking for? what size valves? what size intake runners? what compression? flat cam? roller cam?
Re: WTB - SB chevy aluminum heads
Posted: Fri Jun 07, 2013 12:21 pm
by jw80malibu
looking for a 64cc with 2.02/1.60, pre 1986. Trying to upgrade to aluminum and a new cam.
Currently have: dart iron heads on a 385 ci. 10.5: 1 comp. roller cam, 1.6 rockers.
Re: WTB - SB chevy aluminum heads
Posted: Fri Jun 07, 2013 5:06 pm
by Frylok
Re: WTB - SB chevy aluminum heads
Posted: Fri Jun 14, 2013 9:28 am
by jw80malibu
Thanks Frylock.
I know I gave you the specs of what I was looking, would you recommend any other sizes that would be better for my engine or is the 190 / 64cc the best bet?
Re: WTB - SB chevy aluminum heads
Posted: Fri Jun 14, 2013 5:42 pm
by Frylok
What range camshaft is it? Whats the HP range you are looking for?
Re: WTB - SB chevy aluminum heads
Posted: Tue Jul 23, 2013 4:15 pm
by jw80malibu
Thanks for the replies, sorry for the delay.
I am looking to upgrade to a Comp Cams XTREME Energy Hydraulic Roller, Advertised Duration 288/294, Lift .520/.540, RPM 2500 to 6000.
heads I was looking at were the ones you sent a link to 190 cc promaxx and BluePrint Engines Muscle Series Cylinder Heads H8002K (195/75cc with a 64cc chamber).
Thoughts on the combo?
Re: WTB - SB chevy aluminum heads
Posted: Tue Jul 23, 2013 4:23 pm
by jw80malibu
looking to get around 450 hp give or take
Re: WTB - SB chevy aluminum heads
Posted: Tue Jul 23, 2013 7:19 pm
by Frylok
The blueprint heads should get you closer to the 450hp with that camshaft, really good intake manifold, and good headers