SOLD!
Posted: Sun Dec 08, 2013 4:39 pm
355 SBC making around 390hp. Engine is finished and is running. Still needs to be broken in.
Engine is a 1972 truck block 2 bolt main. .030 over
New crank,rods,pistons, set up is from Scat.
New aluminum water pump,camshaft,double roller timing chain with roller thrust button, aluminum dual v belt pulleys for crank and pump.
Camshaft is a comp cams 12-242-2 477/488. Largest cam that can be used with a stock torque converter.
Heads are 882 heads 1.94/1.5 valves. Heads were cleaned and bowl blended. compression is 9.5-1
ARP 12 point main studs, ARP 12 point head bolts with AN washers.
New 750cfm edelbrock carb.
Used Holley street dominator intake manifold single plane, intake was ported and cleaned up inside for smoother runners, has filler neck for engine oil.
TCI flex plate SFI rated with ARP bolts.
SFI harmonic balancer.
Felpro head gaskets, intake gaskets, oil pan gasket.
MSD Street Fire distributor new
New stock starter.
$2000 o/b/o
Engine is on hooper ave in toms river
Engine is a 1972 truck block 2 bolt main. .030 over
New crank,rods,pistons, set up is from Scat.
New aluminum water pump,camshaft,double roller timing chain with roller thrust button, aluminum dual v belt pulleys for crank and pump.
Camshaft is a comp cams 12-242-2 477/488. Largest cam that can be used with a stock torque converter.
Heads are 882 heads 1.94/1.5 valves. Heads were cleaned and bowl blended. compression is 9.5-1
ARP 12 point main studs, ARP 12 point head bolts with AN washers.
New 750cfm edelbrock carb.
Used Holley street dominator intake manifold single plane, intake was ported and cleaned up inside for smoother runners, has filler neck for engine oil.
TCI flex plate SFI rated with ARP bolts.
SFI harmonic balancer.
Felpro head gaskets, intake gaskets, oil pan gasket.
MSD Street Fire distributor new
New stock starter.
$2000 o/b/o
Engine is on hooper ave in toms river