Page 1 of 1
lifter bore and sleeve on BBChevy
Posted: Thu Apr 24, 2008 11:04 pm
by prost67
I'm looking for a machine shop in eastern PA or southeastern PA. I had 3 roller lifters go bad. the cam is just starting to show wear and is fixable, but I took some pictures of the lifter bores and a friend said one looked like it had a crack. I checked it out today with a magnifying glass and sure looks and feels like a crack.
Thanks for any info.
Rick
Re: lifter bore and sleeve on BBChevy
Posted: Fri Apr 25, 2008 10:07 pm
by Bigtime
Doug Meyers (automotive machine) he can do bushing's if the crack doesn't go into the water. I would get it magged first to see if in fact is cracked. Might just be a score from the lifter. If it is cracked you probably will need a new block.
Re: lifter bore and sleeve on BBChevy
Posted: Sat May 03, 2008 10:27 pm
by guido slowski
ray barton can throw in some bushings in, he does that on all the the motors he builds, mopars anyway