1988mustang notchback no motor and no trans , 8pt roll bar , weld wheels 15x8 in rear with mt et slicks (3 passes) 15x3.5 in front with tires (3 passes)brand new upr front end kit installed (tubular k-member , lower control arms , coil over front struts , caster/camber plates) brand new manual steering rack (flaming river)with matching steering shaft. fuel system brand new 12 gal. fuel cell in trunk 8an stainless braided line to brand new electric fuel pump , filter , and regulator (mounted in engine compartment). parts that go with car but are not installed or brand new are msd box , auto meter tack and gauges (3 gauges installed in a/c vent pod) , aluminum driveshaft. car is in real good shape paint about 1 1/2 years old (no hood has mounts for a pin on hood)car also has welded in subframe connectors and lakewood drag struts and shocks (installed) all new parts are brand new installed never on the road yet , started project and lost intrust so now thinking of selling , asking 2900.00 obo. car has aprox 2200.00 of brand new parts installed (i think i still have receipts which you can have)any question call 267-249-9457 or email. car also has 8.8 rear with 373 gears.
email is - joegallicchio@yahoo.com
88 mustang notch roller / lots of new parts installed
-
galic73
- Burnout Box
- Posts: 20
- Joined: Mon Mar 03, 2008 8:08 pm
- Location: wenonah , south jersey
88 mustang notch roller / lots of new parts installed
You do not have the required permissions to view the files attached to this post.
Last edited by galic73 on Mon Jun 30, 2008 7:22 am, edited 5 times in total.
-
dana h
- 60ft
- Posts: 312
- Joined: Sat Mar 08, 2008 1:59 pm
Re: 88 mustang notch roller / lots of new parts installed
do you have any pics and would you consdier parting it out
-
galic73
- Burnout Box
- Posts: 20
- Joined: Mon Mar 03, 2008 8:08 pm
- Location: wenonah , south jersey
Re: 88 mustang notch roller / lots of new parts installed
i am working on getting pics , but no i do not want to part it out
-
galic73
- Burnout Box
- Posts: 20
- Joined: Mon Mar 03, 2008 8:08 pm
- Location: wenonah , south jersey
Re: 88 mustang notch roller / lots of new parts installed
i have pics now but i can not post them , send your email and i can send to you.
-
streetracer6032
- Staged
- Posts: 28
- Joined: Wed Apr 02, 2008 10:42 pm
Re: 88 mustang notch roller / lots of new parts installed
pics to streetracer6032@aol.com interested thanks
-
galic73
- Burnout Box
- Posts: 20
- Joined: Mon Mar 03, 2008 8:08 pm
- Location: wenonah , south jersey
-
TrailerTrash
- 60ft
- Posts: 106
- Joined: Sun Mar 02, 2008 11:35 pm
- Location: MILLVILLE NJ
Re: 88 mustang notch roller / lots of new parts installed
pics to... jersey5oh@aol.com thanks!
-
galic73
- Burnout Box
- Posts: 20
- Joined: Mon Mar 03, 2008 8:08 pm
- Location: wenonah , south jersey
-
dana h
- 60ft
- Posts: 312
- Joined: Sat Mar 08, 2008 1:59 pm
Re: 88 mustang notch roller / lots of new parts installed
can you send pics to ROBBPULLER@YAHOO.COM thanks
-
69rs438
- Staged
- Posts: 45
- Joined: Sat Mar 29, 2008 2:04 pm
- Location: Wenonah, NJ
-
galic73
- Burnout Box
- Posts: 20
- Joined: Mon Mar 03, 2008 8:08 pm
- Location: wenonah , south jersey
Re: 88 mustang notch roller / lots of new parts installed
all pms replied and all pics sent
-
Der Kommissar
- 60ft
- Posts: 80
- Joined: Fri Feb 29, 2008 9:10 am
- Location: Red Hill, PA 18076
Re: 88 mustang notch roller / lots of new parts installed
Pics to BadazzVW@comcast.net please.
Rubright Racing Enterprises
-
galic73
- Burnout Box
- Posts: 20
- Joined: Mon Mar 03, 2008 8:08 pm
- Location: wenonah , south jersey
Re: 88 mustang notch roller / lots of new parts installed
new price - 2600.00
-
slim
- 60ft
- Posts: 107
- Joined: Thu Mar 13, 2008 3:45 pm
Re: 88 mustang notch roller / lots of new parts installed
Is this car 4 or 5 lug? And can I get pics of the cage and inside? slimfitz@gmail.com
-
Der Kommissar
- 60ft
- Posts: 80
- Joined: Fri Feb 29, 2008 9:10 am
- Location: Red Hill, PA 18076
Re: 88 mustang notch roller / lots of new parts installed
Joe,
Deposit sent via Paypal. See you Friday morning.
Chad
Deposit sent via Paypal. See you Friday morning.
Chad
Rubright Racing Enterprises
-
galic73
- Burnout Box
- Posts: 20
- Joined: Mon Mar 03, 2008 8:08 pm
- Location: wenonah , south jersey
Re: 88 mustang notch roller / lots of new parts installed
SOLD!
thanks gdr!
thanks gdr!