GoneDragRacing.com

My daily car, (98 crown vic) has a bad water pump. It looks like a very simple job, remove the the belt and pully and remove 4 bolts that secure the pump to the front of the block. I did all that and the pump is stuck in there. The car has 223,000+ miles and its never been off. I've already broken one of the pry tabs off, it just won't move. I even started the car to get some heat on it and still nothing. Any suggestions, besides driving it into the river?

I belive there is 6 bolts that hold the pump on if they are all off of the pump housing spray some P.B. blaster around pump and give it a good wack with a rubber or dead blow mallet