Page 1 of 1
Plate upgrades
Posted: Tue Sep 30, 2008 3:23 pm
by 73z28
Looking too upgrade my plate I am using now, ( Super power shot 175 hp max). I was going to use NOS Cheater (up to 250 hp), but I've been reading about the Zex Perimiter Plate. Any pros or cons to this plate vs. the std spray bar? Any help would be helpful.
Thanks, Chris S.
Re: Plate upgrades
Posted: Sat Nov 08, 2008 12:11 pm
by 1 bad import
if your looking for a good plate ,call speed tech ,or steve johnson from induction solutions ..buy there stuff ..it will be your last "upgrade "
Re: Plate upgrades
Posted: Sat Nov 08, 2008 2:51 pm
by vino350
NX gemini twin 6 plate without the bars is a great plate. adjustble from 50-300hp and wont break the bank like speedtech and steve johnson stuff. but if money is no issue i'd go with a speedtech plate
Re: Plate upgrades
Posted: Tue Dec 02, 2008 10:51 pm
by Pyott Racing
Steve Johnson is the only place to go for your nitrous stuff! no one will give you the 1 on 1 support and knowledge like Steve will.Tell him Mike Pyott told you to call.As far as "breaking the bank " I disagree, he is not the "cheapest" but I there is ALOT of "cookie cutter" systems out there with little or no support.Not the case with Steves systems!
Re: Plate upgrades
Posted: Wed Dec 03, 2008 2:15 pm
by BADD68
Nitrous pro flow is also very good right out of the box and has excellant tech support.
AND, you can call me as i am a dealer!!!
Thanks
Harry
Re: Plate upgrades
Posted: Thu Jan 01, 2009 4:22 pm
by larrye827
Zex Perimiter Plate is the way to go dollar by dollar,
http://www.zex.com/Base/Video/ZEXPlate_WEB.wmv, and It work better than a bar system. But if you have the money, go with Steve Johnson or Speedtech system, that is your final uprade.
Re: Plate upgrades
Posted: Mon Jan 05, 2009 12:13 am
by cmracing
Re: Plate upgrades
Posted: Mon Jan 05, 2009 9:29 pm
by miclau
1 bad import wrote:if your looking for a good plate ,call speed tech ,or steve johnson from induction solutions ..buy there stuff ..it will be your last "upgrade "
x2
Re: Plate upgrades
Posted: Mon Jan 05, 2009 9:31 pm
by miclau
Mike , I still say that is going to be fast
Re: Plate upgrades
Posted: Wed Jan 07, 2009 4:48 pm
by cmracing
Thanks! I hope to get it in the 8's just for the fun of it this year! I will only be using the plate for the 10.0 Index Racing (20-50hp shot depending on the weather).
Re: Plate upgrades
Posted: Wed Jan 07, 2009 6:08 pm
by miclau
cmracing wrote:Thanks! I hope to get it in the 8's just for the fun of it this year! I will only be using the plate for the 10.0 Index Racing (20-50hp shot depending on the weather).
Nice ,hope to see you out
Re: Plate upgrades
Posted: Wed Jan 14, 2009 12:18 pm
by Pyott Racing
Thats good stuff right there!!Steve is the best
Re: Plate upgrades
Posted: Wed Jan 14, 2009 8:49 pm
by adamsvega
damn boy how big are the injectors to feed all that !!!! give alittle info on the plate and nozzle spec too!!!!
Re: Plate upgrades
Posted: Wed Jan 14, 2009 10:35 pm
by cmracing
I won't be using the plate and the direct port together. I have the DP on there to run fast when I have time to play. The plate is there for a few extra ponies in the summer time to run the 10.0 Index stuff. I just got a set of 60 lb/hr injectors to replace the 43 lb/hr's that are on there now. The 43's were only good for a 150hp shot. The 60's will be good for awhile.
I can always run the plate wet (have done in the past with the 175-200 hp shot) so if I really want to, I can hit it with a lot, more than I have convertor for though!
The Weldon pump can certainly keep-up with the motor.
Re: Plate upgrades
Posted: Sat Jan 17, 2009 3:31 pm
by adamsvega
options ,OPTIONS, AND MORE
OPTIONS!!!
