Page 1 of 1
My 97 blazer.. water leak drivers door
Posted: Sat Nov 15, 2008 9:16 pm
by iceman
Need to fix the weatherstripping, when it rains hard outside, it rains hard inside in my POS blazer.
Can I take the weatherstripping off and re-seal it with that 3m weatherstrip adhesive.. or do I need brand new weatherstripping? Any place I can get it DIY or should I just go to a body shop?
thanks
Re: My 97 blazer.. water leak drivers door
Posted: Mon Nov 17, 2008 5:15 pm
by 67camaro101
ide get the same whether stripping, go to a junkyard. be careful taking it off very small clips hold it on. if your not careful your rip it and you will be at square one again.
Re: My 97 blazer.. water leak drivers door
Posted: Mon Nov 17, 2008 6:50 pm
by iceman
I don't think I can make it to a u-pull-it anytime soon. Know a place that sells replacement weatherstripping?
Re: My 97 blazer.. water leak drivers door
Posted: Sat Dec 20, 2008 8:00 pm
by Black1987stang
Weather stripping for my stang I got from I think mustangs unlimited online? but for a chevy truck they gotta have a aftermarket source or some auto parts stores can probably order you some. My car used to leak water when it rained and when I washed my car, it had worn door hinge bushings and was making the door sag and not seal against the weatherstripping, open your door and lift up on the door, if it lifts just the door up something is probably worn, and could be something else from the weatherstripping. Just a possibility
Re: My 97 blazer.. water leak drivers door
Posted: Sat Dec 20, 2008 9:49 pm
by iceman
I took it over to Executive auto body, my man Jimmy fixed it up
