Six BBC Motors for sale

[Blown69Camaro]

#1 Aluminum head 555/905hp Roller motor This is a Shafiroff Crate motor that has 20 passes on it. This motor had the M2 CNC heads on it. Has a 780 lift roller cam, with a 1100 dominator, MSD Crank Trigger ING. CSR Water pump. This motor wnet 8.95 @ 148.00 on a 93 degree day in a 2800 pound car

Complete Carb to pan with many upgrades $10,000.

****************************************
#2 Steel head 470 motor with 10.5 compression Crower cam 627/627 Int&Ext. Was a brand new ls-6 crate motor that had a cam and pistons upgraded. All Machining and the rotating assembly was completly balance by Doug Myers. The heads are 990's All Work done by Roger Performance.
$7000.00

#3 Aluminum head 470 complete Solid Roller motor With Fresh Brodix Big Brodie heads that flowed 347 intake and 324 Exhaust @ .28 by Ram Racing, Crane Solid Cam with 1.8 New Scorpion Rockers 810/756 Int and Exhaust, New Manley H beam rods, with new 12.5 comp ratio pistons, Moroso Pump, Dominator intake and 1050 Dominator. Again Machine work done by Doug Myers and motor assembly work done by Rogers Performance. 8000.00

#4 509 Built by RADAR with 14 passes. Motor went 9.40 @ 148.00 in a 3100lb car with a low launch chip and 5000 shift chip in it. $8,500

#5 Aluminum head 470 complete with Chevy 077 heads Street cam, victor-r intake. complete carb to pan $7,500

***************************************
#6 All Aluminum 572 Components

NEW All Aluminum 572 Merlin 10.200 Tall Deck with the .400 Raise Cam Block $4,750
New Lunati Pro-Series Crank $1,800
New Venolia Forged Flat Top Blower Pistons for the 4.500 $500.00
New Eagle Forged Steel H-Beam Rods 6.700 Rods for the 572 motor 600.00
Brodix BB-4 Xtra CNC Heads Bare 2900.00
****************************************
Original cost total $ 10,550 + 600 Shipping = 11,150 total
Special Price for all $10,000
*****************************************