Page 1 of 1
explorer 8.8 shortening
Posted: Sat Apr 11, 2009 5:11 pm
by fgee
anyone here know someone or can shorten a explorer 8.8 with disks, im using 2 short side axles and the one side tube needs to be shortened also anyone know about how much $$$ this costs?
Re: explorer 8.8 shortening
Posted: Fri Apr 24, 2009 11:49 am
by John Boschma
If you just need to get one side of the axle housing shortened it shouldn't cost toomuch i would think any more then 4200. unless you take them a fully loaded rearend and want them to dissamble it and re assemble.
if you take a reputable shop the bare housing with no internals ready to be cut and welded should be pretty cheap.